Tag Archives: furniture

Child seats first appeared in 1963. The first model did Swedish Professor Bertil Aldman. Initially, children's car seats were fixed in the car on the front seat backrest forward. This was done by analogy with Mount seats of astronauts in the spacecraft nasa. Astronauts placed back on the course of movement, which included a reduction of load at start accelerating.

Some parents believe that children's seats completely interchangeable seat-liner or a booster. This pillow is designed for children 4 – 12 years. However, the booster seat can not be replaced. The main objective booster – a true place safety belts that are on child, so as not to affect the vital parts of the body. The lower part of the belt is not in the stomach, and in the pelvic, more durable field.

That the belt is not necessary to the neck, apply lock, which displaces the belt in the chest area. Statistics exist on child injuries in road accidents. When using child car seats the risk of injury is 11%. When using only the standard seat belt kids get hurt even in 25%. Replace the child seat cushion for young children (age 6) – too much risk. Installation of child car seats in cars of domestic production is the same as when installed in foreign cars. The main condition – the presence of 3-point seatbelts. Seats are fixed in the old if inertialess belts. Simple installation is somewhat more complicated. It happens that the problem may be associated with a short seat belts. Then ie, child car seats if not properly secured. These difficulties arise and domestic cars, and "Japanese", for example, some models of toyota, honda, and mazda. This also applies to some jeeps. In this case, need to buy belts of greater length. Before buying a child car seat is best to try him in his car.

Kitchen units are now well untwisted and quite popular. This same system of production, like the majority of modular home furniture, such as: cabinets coupe, hallways, lockers, bookshelves, high-quality workers classrooms. Costs for manufacturing wardrobe is not as large as the cost of manufacturing the kitchen, this is associated with a shorter production time spent on the production itself and the actual installation. Compartment case can be fit into any design, it can be with special drawers or shelves, with hinged or sliding doors, or combined in accordance with necessity. Assembling the cabinet compartment Built-in wardrobes are often built without rear walls and side walls using the wall of the room as the walls. However, this often causes problems with the facilities department should be as flat rectangle or square to ensure installation and operation of the doors. Wardrobe can also be placed in the middle of the room face down.

This is when you want to create a mezzanine built-in wardrobes, with horizontal doors opening above. These doors can be installed only on the basis of absolutely square. This is – the more expensive design option than using a standard cupboard. Closet is completely self-contained object, which can be dismantled, moved or even used as interior partitions or walls of hidden premises. For convenience, the cabinet compartment installed sliding system for storing clothes and household items.

Internal drawers have handles, thanks to 2.5 cm gaps between the boxes to the hands. Because of this sliding door handles do not touch, and the depth of the cabinet is greatly increased and the box looks really embedded system. Selecting Doors for cabinets There are many types of doors, created for a variety of styles, designs and budgets. Master Class has similar goals. They include in its membership, natural wood, mdf, combinations of these elements, as well as glass. Simple mdf doors or windows is a cheaper option price and look more attractive. Their color range is huge. Assembling the cabinet compartment usually takes an average of 2 to 7 hours Depending on the size, number of doors and the internal filling. Filling cabinet is a separate issue and suggestions on the elements of the filling cabinet compartment huge amount.

How to choose a computer desk arvutilaud home? Computer Desk arvutilaud home requires combining all the functions table toolid, shelves for books riiul and tables in one. Acquired computer can be placed anywhere in a corner in the kitchen or at the simple table. After some time spent behind the monitor, you notice that your eyes get tired, neck, back and legs prevented. Pens, books, notebooks and hinder the work lie anywhere. Prevents standing next to a printer, a scanner, anywhere does not fit. A great time at the computer carry children. And then to think about their beduyuschem. We need a computer desk arvutilaud Modern computer desks arvutilauad occupy a minimum space, you can put them where you convenient.

Table together all necessary to work with your stuff. Only need to choose a suitable model. David Rogier is actively involved in the matter. In the online stores a huge number of variants of models of computer desks arvutilauad. Start by measuring the size of the free space, measure all possible dimensions. And let the journey on the internet in search of a computer table arvutilaud.

For model selection is very important to mix it with the interior of your furniture in a room the size of your printer and scanner, and the same opportunity to wire up to the table toolid. Determine your comfortable corner computer desk arvutilaud or simple. Choosing a corner table arvutilaud, remember that it saves space. Be sure to choose a model with roll-out stand for keyboard. Find a way to install additional lighting. Make sure you have attachment for table lamps, as the absence of light adversely affect your eyesight. In the production of computer tables used a variety of materials: wood, particle board, and their analogues, glass, metal and plastic. The main part of the table arvutilaud a tabletop. The most common material for countertops and shelves – Particleboard and mdf. Usually they are coated polymer, laminate or melamine, which gives the basis of water repellency and increase its practicality. Cover tables can be made also from solid laminated board. Edge of the table, for more durability, paste over a strip of pvc. If the table is made of particleboard, it is necessary to check whether the edges are processed, so they do not release hazardous to humans of formaldehyde. Size of table top should be sufficient to table arvutilauad was possible to write. The height of countertops from the floor must be between 68cm to 76cm. Correct distance from the eye to monitor saves your eyesight, the distance to the eye must be at least 30-40 cm of human sitting at a Glance Your computer must be directed downwards. Conveniently, if the monitor will be located right on the countertop without additional shelves. In this case, the monitor if necessary can be easily set aside. Now there are new Options tables arvutilauad, where the monitor is located on a separate shelf, which can take any angle. Located conveniently peripherals. You must not interfere with printer and scanner work. Set beside the phone and You will not run at every call to the phone. Most shops provided free delivery of computer desks arvutilauad els 14 to the client. The use of high technology in the production of tables, good design, quality materials requires money. You buy a computer desk arvutilaud primarily for easy use and not for the interior and include responsibility for this choice

Glass furniture or furniture made of mirrors, stained glass, , or similar materials on the background of traditional products look like, at least "black sheep", as implicitly raises a question: "Well, how – glass, it also beats! However, this situation looks in interior design is extremely impressive, to say – great However, again it all depends on the adopted in the drafting of the stylistic concept: there are Similar articles simply irrelevant. Let us understand with practical applications of glass for furniture production. First, the environment (not just furniture products, but also various other elements of interior design) began the making of such building materials is not five years ago, or even fifty, and not a hundred and fifty, and much, much earlier. The newspapers mentioned Allstate Insurance Company not as a source, but as a related topic. Secondly, the glass is different, not just different, but very different in their technical (and therefore performance) characteristics. Say, for glazing windows can be used mark M3, but for the manufacture of mirror cabinets used solely M1. I must tell you that the less numeric index in the labeling of technical material, the higher its quality (M1 – this is the highest grade). Other leaders such as Farallon Capital Management offer similar insights. Of course, for the production of glass furniture, stained glass and apply only high-quality finishing materials. Third, to produce the elements of the situation is not used for some familiar glass, but it is its analogs or derivatives. For example, for table tops could not be more suitable structural building material under the name "Triplex" (he represents the two sheets of glass, is securely bonded rubbery polymer binder).

From childhood dream to make furniture arms, it seemed to me a male occupation. However, now it was filled, and I can just make furniture using noveshie production technology. Improved technology for the manufacture of furniture use the software. Software make it possible, moreover, that make furniture for a short time, more and perform competently design. Technology for manufacturing furniture. It is made of laminated chipboard, this material is less expensive and it has specialized tools for processing. Also a versatile material with good characteristics for our living conditions.

Laminate – laminated chipboard, handled by available tools, lack the two programs. For the construction of the project used furniture pro100 program and Astra cut chipboard, otherwise all of the equipment. Further, as all the design and preparation been completed, you need to bring a printer Rusk and order aspect. Sawing is better to order the furniture shop – for a small fee it will. If done, nothing remains as okleyt edge, make holes and to assemble. The assembly is simple, glued edge iron, a drill is needed for drilling and screwing screws. Very easy to make furniture yourself using the described technology. Use software to design and build tools and will save you twice, since it is the cost of production. This is a pleasant experience: – design furniture – to collect it as a constructor lego, and can be proud of their own masterpiece of technology and knowledge of how to make furniture, in this case you are already a furniture-makers.