Steel Products

Conformed of steel the steel Conformed one it is associated to him to the Steel Products that obtain after the reduction of the Scrap iron and/or cast iron through a process of Lamination, classifying itself in two great groups those that they correspond in the heat of the moment to the laminates and the laminates in cold. Laminates in the heat of the moment are all those elements that are obtained through which it denominates processes of continuous casting and which they consist essentially of a device that distributes in different lines of manufacture the strained Steel, this lines has matrices with it forms that are desired to make that they can be channels profiles L, in T strap, section I standardized profiles, etc, a very important element of this type of manufacture is the Alambrn which is not another thing that a metallic product that are obtained in the heat of the moment by a process of lamination thanks to a train especially designed for this effect, known like lamination train, alambrn has section circulates or oval that varies between 5 and 30 mm of outer diameter, which usually is volute in coils of hundreds of meters, can be said that the applications of this product are varied, another important product is the billet or platina the same that are metal plates of lengths of 6m in Steel or another material their utility is very ample, usually usually makes in the definitive form from the steel mill like a product. The molds of the continuous casting are cooled by water and previously allow the formation of long sections of the enunciated elements, the application of the same is essentially structural since due to the manufacture process it practically considers them isotropic and isothermal, and with a configuration of the constant material throughout its structure, the design techniques therefore can be applied if inconvenient (correction factors) to the structural design. Besides the Conformed one previously described it is necessary to control the conditions of cooling so that these elements are ductile since a quenching can cause in an irregular hardening that is translated in fragility of product. The composition of this product can vary according to the application and the used process but usually he is current to find it with coal contents of around 0,8%, proportions of other elements like phosphorus of 0,48%, Manganese of the 0,30% among others Laminated in fried are those elements that leave the metallic plate and that after a schemed process of acquires their final form, the processes of schemed usually are by cuts of zizalla and dubbing, these elements, due to the schemed one presents/displays concentrations of efforts throughout the same, since they change his crystalline structure tending to be harder in these areas but simultaneously more fragile, thus recommends the adoption of calculation techniques precise, with associated factors of safety to this uncertainty in the charge distribution, they are possible to be found in the form of channels C, G, angles, etc. they have its more important application what metallic or ornamental carpentry without no disadvantage is denominated and usually they are economic that those because its manufacture is local whereas first in his immense majority they are mattered and its weight increases in price them load.