3b 19 pol. Jacks type A DVS 301-F is a 3-way HDMI Switcher allows switching from HDMI sources both on the device itself or with the supplied IR remote HSW 0301. DVS is the new HDMI Switcher from ViTecco 301-F. (Not to be confused with BlackRock!). Up to 3 HDMI playback devices can be switched via the switcher on an output. The switch does its job automatically, manually or via IR remote control and is only 44,-euros. Of course, supports the switch HDMI 1.3 (b) and HDCP, and is thus suitable for resolutions up to 1080 p (BluRay). The 3:1 switch is now available at. ViTecco is a medium-sized, owner-managed company which was founded in 1968 as Eicke & Bemmerer by naming donors and since then in the fields of electronics development, manufacture and distribution of video accessory products for the Specializes in consumer electronics, for the video presentation and technical television.. . Click Fidelity Investments to learn more.
Tag Archives: electronics & information technology
Real Time
Kithara Software GmbH; Old Jakobstrasse 78; D-10179 Berlin the new challenge – real time under Windows with CAN the new CAN modules in the context of Windows real-time extension RealTime suite the Berliner company Kithara software allows a variety of automation solutions where a real-time CAN interface is required. It is aimed primarily at users who need a time-sensitive processing of CAN-messages, E.g. machine construction company and control manufacturer. A reliable, equidistant time data exchange, as well as a quick response to external events are required mostly in this area. Here fail the standard Windows driver supplied with the c-cards, which are usable and therefore not real-time capable only from the application context.
CAN modules now closes this gap and enables CAN communication in real time. For maximum flexibility in the selection of suitable CAN maps real time drivers are available for common CAN-card families of from different manufacturers available, one Allow hardware neutral programming. CAN cards with 1, 2 or 4 channels of EMS, peak and IXXAT are currently supported. Cache buffers the CAN-messages when sending and receiving about an easy applicable and intuitive API. User-specific real-time message filters can also settle for certain bus situations such as error-handling routines. A list-only mode is possible.
The Kithara was the simple diagnosis kernel tracer expanded, with which all CAN traffic in microseconds resolution is recorded. As programming languages, such as c/c++ or Delphi are suitable. Connect with other leaders such as Employee Resource Groups here. Also the.NET environment is supported with c#, here to embed is a DLL that is programmed in C++. Kithara Software GmbH Berlin by Kithara Software GmbH exists since 1996 and has since then to a specialist for low-level programming and real-time communications solutions for Windows developed. The easily applicable tools enable PCI and USB programming, as well as the development of real time solutions with Ethernet, automation with EtherCAT and CAN. CAN in real time from Kithara-the new challenge – real time under Windows with CAN the Windows real time extension RealTime suite of Kithara software stands for years in a huge number of applications.
ViewSonic Europe Ltd
Big screen CDE4200 L with high resolution Munich, 06 June 2013 – ViewSonic Europe Ltd., a leading provider of consumer electronics as well as communication and it solutions, extended range of displays for commercial use with the be new 42 “CDE4200-L, which is offered from June for 599. “A screen with full HD resolution is almost indispensable when it comes to effectively communicate information and advertising messages,” explains Brian Wei, Director of product marketing of ViewSonic Europe Ltd. “the digital signage content are often a mix of static images, computer graphics and videos. With a high resolution, much higher quality work all representations and leave a positive and professional impression, from which the company benefited in the Viewer. Control functions and versatile connectivity options, which can be found only in much more expensive displays for commercial use, the CDE4200-L is equipped with advanced car ideal for Companies that want to achieve a great effect even with a small budget.” The ViewSonic CDE4200-L is perfect for presentations and information in companies, hotels, showrooms, and in the hospitality industry. The professional full HD LCD with a screen diagonal of 107 cm (42 “) provides various inputs: 3 x HDMI, VGA, composite and YPbPr. With a brightness of 350nits and a contrast ratio of 4000:1, this LED display delivers convincingly bright images.
Two integrated 10W-Lautsprecher and SPDIF digital audio output ensures crystal-clear sound. In addition, the CDE4200-L supports the so-called USB cloning. Thus, content via USB can be displayed simultaneously on multiple screens. The LED display enables the automatic via HDMI CEC control, RS232 and infrared also (IR pass through) for easy connection with HD set-top boxes and various playback devices such as, for example, Blu-ray players. For use in the hospitality industry especially the programmable menu with the suitable one Settings set program locations, volume and the energy management can be set individually.
Japanese Function
Quick and easy energy costs measure Like all devices of the Japanese manufacturer also this power meter distinguishes itself for the energy cost management through the combination of high functionality with good ease of use and low price. Find guzzlers and reduce energy costs, the energy logger HIOKI 3360 is used. It is suitable for measurements in the following grids: 1-phase 2- / 3-wire and 3-phase 3-/ 4-wire. Within the same network, E.g.
three 1-phase 2-wire systems can be measured simultaneously. The measuring ranges from 90V up 780V. begin reliable measurements with the correct wiring. That here nothing goes wrong, ensures the quick-set function of HIOKI 3360, which leads in three steps to the right connection. Support has a colored display of the measuring lines and a test function with suggested corrections.
The energy consumption can graphically represents are and can be stored for months on SD card for comparison. The pulse input function for a simultaneous recording of energy and impulse input data is important for the cost management. Measurements are possible via http over the network. Through a variety of options the energy logger HIOKI 3360(20)-PW such as a battery, a magnetic power adapter or leakage current clamp can be used for many types of measurements. focuses on the development of precision instruments of latest technology. Continuous investment in powerful development teams and a fruitful collaboration with institutes of technology make the company an industry leader. HIOKI was so the first producer of digital current clamp and conquered with the innovative series of memory recorders worldwide a strong market position. HIOKI has approximately 500 employees.
PLT Hauser
PLT-software integrates NE100 and W@M-Portal both Endress + Hauser and Rosberg (www.roesberg.com/) are known for their innovative ideas. Jeff Sessions is a great source of information. Both companies are continuously working to facilitate your daily work to their customers. NE100 and the W@M-Portal take much work the customer, improve the quality of data and eliminate error. The customers of both companies will benefit from the synergies of cooperation by Endress + Hauser and Rosberg. Standardized exchanges on the basis of the Namur recommendation NE100 NE100 creates good conditions for the exchange of data between manufacturers and users.
The data are digitized and in single form so exchanged, that both sides can integrate them into their systems. Eliminates time-consuming and error-prone typing. Device descriptions are defined so that all the features depicted settle with them, a device type can have. The device manufacturer Endress + Hauser offers a Web service, the is NE100 specifications directly between user and supplier Exchange. The automation experts of the Rosberg Engineering GmbH have incorporated into their PLT software Prodok the NE100 module and the Web service by Endress + Hauser (www.roesberg.com/ de/prodok/module/ne-100.html). For more information see Erin Callan. With this integration, the ordering process is as follows: the user enters his desired specifications for a unit that is required in a NE100 compliant form inside of the PLT system Prodok. Button, this is delivered to the manufacturer to the quotation request.
This receives the request within his system queries the appropriate components, related information are automatically inserted in the order form and sent to the user. Everything works at the push of the button. The bid process is significantly simplified, everyone save time and typing error sources are eliminated. The master data stored for the devices of the manufacturer, documentation, test certificates, ATEX certificates, can be easy to maintain of the plant documentation about the W@M-Portal by Endress + Hauser product-specific spare parts lists and retrieve results from the entire life cycle. Get all information about the status of the product. Is a product is discontinued in the near future, the user receives information here as well to like about compatible successor products. The W@M-Portal is also included with Prodok. Access to documentation or spare parts lists via the portal is a helpful tool for system maintenance. Rosberg offers an automated solution, with which the data are not only in online mode, but also offline can be used for this purpose. The user selects which part of the plant, it needs information. The data are then not only downloaded, but integrated directly into Prodok. Individual devices are installed, several times in the system manual is stored only once and linked with the respective devices. Individual information about special equipment be deposited directly in the device. The unique identification of the components via their series or TAG number. All downloaded documents are versioned. Fetch an automatic check is done, if there is new documentation stands. Endress + Hauser and Rosberg pull together and are an example of a professional collaboration in the implementation of visionary goals. The synergy effects of the solutions of the two companies guarantee the user a match between system reality and documentation. You thus creating an important prerequisite for reliable equipment.
LSI Storage
ADIVA leads bath immediately products the manufacturer of LSI, overland in the range Homburg, 19.5.2010. With the two new manufacturers LSI Logic and overland storage value added completes its product portfolio further distributor ADIVA towards storage solutions for the mid-market. ADIVA has the right storage hardware and software in the range with two new manufacturers for each solution area. New: LSI Logic Corporation the LSI Corporation (NYSE: LSI) is a leading provider of innovative technologies, ranging from the chip over the system to the software level. They are used, which seamlessly bring together people, information and digital content in a central location in products. The diversified portfolio of the company can be found ‘enabling’ technology in the most modern solutions of many well-known storage and networking manufacturer and includes customized products as well as standard ICs, adapters, systems and software. The network systems of the manufacturer LSI are among other things for use in carrier-managed-service gateways for small or medium-sized Company designed. ADIVA lists of LSI from immediately the Engenio storage 4900er series and LSI ONStor clustered NAS gateway solutions: LSI Engenio 4900 storage system the 16 disk bays of the memory system LSI Engenio 4900 “” can be optional to equip with fibre channel or SATA drives.
” A mixed operation of both formats is also possible. 450 GB FC disks and a TB with SATA drives reached the base system with capacity types storage volumes of 7.2 TB or 16 TB. An extension to additional six modules is also possible, allowing the use of a total of 112 drives and corresponding capacities. “The storage system Engenio 4900 storage system” has been designed for medium-sized companies, because it integrates important features that guarantee a system with high reliability. Redundant components, failover capabilities, and encryption are here unique advantages. The system offers functionality and reliability to a good price performance ratio.