Read carefully: The notebook is one of the most sophisticated electronic devices, which combines electronics and mechanics. Laptop Repairs should be made by a qualified service center specialists. Any modification may cause partial or complete failure of both the laptop and its components. Deconstructing the notebook, you take all the responsibility on your own risk. In this article I tell you about the trailer of the cooling system and its prevention, to avoid a failure of your laptop. Principle of operation: cooling system consists of a laptop fan, a copper tube with one hand, which is a platform that is attached to the processor via a special paste to improve contact area of the cooling system to a platform processor, and the other attached to thin copper plate (cell).
Heat dedicated processor thermal paste goes through a special heating pad on it, which transfers the heat to the Heat-thin copper plate. A sensor located in the processor at a specific temperature gives signal to activate and adjust the fan speed. Air flow, getting on the copper plate cools them, thereby controlled by the cpu temperature and prevent overheating. Now you have the full representation of how the cooling system laptop, and can see for yourself its effectiveness, waving his hand to the outlet of the cooling system. If air flow is strong enough and the top of the notebook, where cooling system is moderately warm, then your notebook is all right.
But if you do not feel the air flow and the upper part of the laptop is heated, sometimes can be switched off during operation you will need to urgently clean the cooling system to avoid overheating and failure of your laptop. Cooling system notebook are detachable and collapsible. In non-separable systems fan riveted to the construction. To clean nonseparable cooling system even professionals takes time and needs a lot of experience. Some laptops are equipped with special hatches through which you can get to the cooling system to turn off the site from processor and pull her having removed the fan. After cleaning, assemble in reverse order. Many laptops get to the cooling system can only be completely disassembled it and took out his motherboard. If you do not skills such procedure, contact the service center.