Large assortment Tikkurily allows you to choose a special paint for wet rooms with containing an antifungal component, in this case, a latex 'Luya' and 'Remontti yassya-', which have excellent resistance to washing and contain protivoplesnevoy component. How to ceiling paint latex paint? Preliminary preparation of the surface. If the surface is painted earlier, then remove the old paint with it, this surface is washed with a solution 'Maalipesu' (alkaline cleaning means for cleaning and pretreatment of the inner surfaces). Then thoroughly wash the surface with water and give to dry. Then, using the filler surface alignment, previously 'opened' and clamped gap, which use a putty 'Spakkeli' or 'Presto'. Dry surface polish, remove dust. Next gruntuem surface using a primer 'Luya' or 'Euro Primer.
" If the surface is not painted, it is first clean it from dirt and dust. If necessary, corrects the surface of filler series 'Spakkeli' or 'Presto'. Dry surface polish, remove dust, then the universal primer gruntuem 'Luya' primer or any other primer for the walls. The paint should be imposed only on the dried surface. The prepared surface of the paint is applied with a brush, roller or spray. Latex paint is usually dry within one to two hours. Dennis Lockhart is a great source of information. Ceiling surface becomes porous and breathable, allowing freedom of breathing room. How to paint the ceiling with water-based paint? Deposition of latex paint.
In order to after painting the ceiling of us were disappointed to observe a few simple but important observations on color. 1. Paint should be thinned to the desired thickness in accordance with the instructions. Often, the manufacturer recommends paint thinned 5-10% with water. If the manufacturer does not recommend to dilute the paint, then we do not dilute it, just stir. Doing it with a mixer with a special attachment. Typically, for painting the ceiling in a single layer of stirring enough. 2. First, paint the edge of the ceiling, for this we take a brush or roller and the stepping narrow 3-5 cm from the corner of the ceiling with a wall around the perimeter of the paint over the strip narrower. That we need to at subsequent painting is not accidentally smear the walls in the corners of a roller. 3. Then use the roller dunk it in a bucket of paint, but do not drop it in a bucket full, namely poppy. Typically, the roller becomes wet on the one hand, and we necessary to ensure that the entire circumference of the roller is evenly filled with paint. To do this, we roll out the roller to the grid or pan (they are often sold in sets of paint) or on a blank sheet of linoleum or hardboard, but not on the ceiling! If you want to once again dip into the paint roller and roll out again. As for the painting works this operation we will be repeated regularly. 4. After we unrolled cylinder and its string is uniformly filled with paint, we start painting the ceiling. When painting a ceiling, we must remember that the first movement to carry always in one direction, while each subsequent layer must be applied perpendicular to the previous one. The last (upper) layer of paint is applied solely towards the window. We wish you success in this challenging and exciting business and we hope that our tips and tricks to help you achieve the perfect result.