Combination of elements lining with a supporting wall and a floor by means of molding plaster and hemp. Protection is provided by a wooden mantelpiece reinforced belt hardness of heat-resistant concrete based on cement, which should not come into contact with the iron furnace. 21.Vystupayuschie details veneer (wooden shelf, the belt stiffness) should be securely fastened to the wall. Cast iron fireplace installed on a concrete slab chimney lining. The minimum distance between the furnace and a fire protection wall, 10 cm Connection furnace with a chimney made using stainless steel pipes of diameter 230 or 200 mm. Places joint pipe to the chimney pipe furnace and hermetically sealed fire-resistant materials and refractory cement. 22.Zapreschaetsya use a cast-iron burner as a stand-alone heater (outside of the chimney cladding and jacket).
23.Kozhuh fireplace should be made of fireproof materials. Most often it is made of gypsum board attached to the rigid frame of metal profiles. The entire inside of the enclosure should be protected by special insulation. As a foil insulation can be used with one hand, a slab of basalt fiber, basalt fiber that is set aside gypsum board and aluminum foil – in the direction of the connecting pipe. 24.Vo inside of the casing at a distance of not less than 30 cm from the top of the shield is installed in non-combustible materials. In applying foil plates of basalt fiber nefolgirovannaya her side should be directed to the ceiling. The distance from the protective screen to the ceiling should be increased to 70 cm, if the ceiling is made of combustible or nonflammable materials and thus protected from fire.